This solution is for Nokia Asha 302 Power Button Ways and Jumpers points. If your phone's power button is not working you can use the guide in this article to solve your problem.
First of all check the phone if anything else is not causing this problem. If your phone is off and you can't check the button plug the charger in and see if the phone is charging, if it isn't turning and it isn't charging too then probably the problem is with your phone's software and you need to flash it. If the phone is on or charging but the power button is not working make the jumpers as shown in the diagram below. Nokia Asha 302 Power Button Middle Positive is connected to R2400.
Sorry about the schematics picture in between the regular picture of the motherboard but the only picture I had of Nokia Asha 302 motherboard had the cover in it. So I have took the schematics picture and pasted it on the main diagram. The jumper is marked with red point so you can get the clear idea where to make the connection.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further Questions please don't hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
0 comments:
Post a Comment